Part 1 SLP Assignment Overview: The Requirements And Design ✓ Solved

Part 1 Slp Assignment Overviewwhen The Requirements And Design Are Co

Part 1: SLP Assignment Overview When the requirements and design are completed for a project, the coding can begin. A good first step in development is to use the design to create a prototype, or proof of concept for the system. The prototype helps ensure the validity of the design and demonstrates that the basic concepts in the design will provide the desired solution. For this SLP assignment you will use your Design Document from the Case Study to guide the creation of a prototype for your integrated system.

Part 1 SLP Assignment Expectations

The Prototype should address the following requirements:

- The prototype should match the overall design created in the Case Study assignment and should provide evidence that the intended design will work.

- A basic visual interface to support navigation of the program and identify the future functionality of the application.

- No subsystem functionality is required but stubs to connectivity points for subsystems should be identified and have the ability to perform basic functionality tests.

- All code should be well-documented with comments.

- The program should run without significant errors.

- Include a document called operation.docx that describes how to operate the application.

- This document should provide sufficient information to allow the instructor to set up and operate the application.

- Identify any external system requirements.

- Key parts of the application should be identified (i.e., tell the instructor where to find the important parts of the application).

- This document should also provide a summary of how the prototype shows proof-of-concept for the project.

- Include a section called STATUS with a summary of the current status of your project including problems encountered and how they will be addressed.

Be sure to contact your instructor if you need help addressing any issues.

Part 2: SLP Assignment Overview

For this SLP assignment you will submit the Alpha version of your project. An alpha version of an application will have the major functionality operational but not fully completed. The purpose of the Alpha version is to ensure the major functional components of the application will work as intended. Your alpha version should have connections established to all outside components and internally developed functionality should be operational at a least a fundamental level.

Part 2 SLP Assignment Expectations

The Alpha version should address the following requirements:

- The application should match the design created earlier in the course with the exception of any changes required to address problems or conform to a revised timeline.

- All major functionality should be operational at least at a minimal level.

- Connections to outside components should be functioning at a basic level to prove they will work for the final version of the application.

- The visual interface should provide access to all major functions of the application.

- There should be a demonstrable, functional connection to the required database for the project.

- All code should be well-documented with comments.

- The program should run without significant errors.

- Include a document called operation.docx that describes how to operate the application.

- This document should provide sufficient information to allow the instructor to set up and operate the application.

- Identify any external system requirements.

- Key parts of the application should be identified (i.e., tell the instructor where to find the important parts of the application and changes that have been made since the last submission).

- Include a section called STATUS with a summary of the current status of your project including work performed since the last submission, problems encountered and how they will be addressed.

Be sure to contact your instructor if you need help addressing any issues. ZIP all required project files and documents together and submit for grading.

Sample Paper For Above instruction

The development of a software system begins with thorough planning and design validation. Once the requirements and design are finalized, the initial step in the development process is to create a prototype that serves as a proof of concept. This prototype is vital for validating the design concept and demonstrating that the proposed system's core ideas are feasible and effective. In particular, the prototype should align with the detailed design document derived from the initial case study, ensuring consistency and accuracy.

The primary purpose of this prototype is to offer visual and functional evidence that the system will work as intended. It should feature a user-friendly interface that allows navigation and highlights the application's future capabilities. While it isn't necessary to implement all subsystem functionalities in this stage, it is important to include placeholders or stubs for subsystem connectivity points. These should facilitate basic testing of interactions and integration points.

Code quality is critical; all source code must be thoroughly documented with comments to ensure maintainability and clarity. The prototype should operate smoothly without major errors, reflecting a stable foundation for future development. Additionally, a comprehensive operation manual, preferably in a Word document named operation.docx, must accompany the prototype. This document should detail how to set up and operate the system, making it easy for an instructor or evaluator to understand the application's usage.

Another key aspect involves identifying external system requirements—such as hardware, software, or network components necessary for operation. Important features or modules within the application should be clearly marked to guide reviewers and future developers. The operation manual should also include a summary of how the prototype validates the conceptual design, emphasizing the proof-of-concept aspects. Lastly, a STATUS section must provide an overview of the current project phase, noting any challenges faced and the proposed solutions.

Once the prototype is completed, the next development phase involves delivering an alpha version of the application. This iteration should incorporate major functionalities and establish connectivity with external components, such as databases or APIs. Although not fully refined, the alpha version must demonstrate that its core features operate at a basic level consistent with the initial design.

The alpha release should reflect the earlier design with minimal adjustments needed for problem resolution or timeline adherence. It must enable essential functions through its interface, with at least foundational connections to external systems like databases and third-party services. Documentation remains important; all code must continue to be well-commented, and a detailed operation manual should be provided.

Key features of the system should be easily identifiable within the application, and recent modifications since the last submission should be documented and highlighted. The project’s current status must be summarized in a dedicated section, reflecting progress, encountered issues, and planned solutions. All project components—files, documentation, and code—must be zipped into a single package for submission.

References

• Author A, Title of Book, Publisher, Year.
• Author B, "Journal Article Title," Journal Name, vol. xx, no. xx, pp. xx-xx, Year.
• Author C, "Conference Paper Title," Conference Name, Year.
• Author D, "Web Resource," URL, Accessed Date.
• Author E, "Technical Report," Institution, Year.
• Author F, "Standards Documentation," Organization, Year.
• Author G, "Relevant Industry Guidelines," Industry Body, Year.
• Author H, "Related Case Study," Journal/Source, Year.
• Author I, "Research Report," Institution, Year.
• Author J, "Product Documentation," Vendor, Year.

Note

This sample paper provides an overview of the expected approach to creating prototypes and alpha versions of software projects, emphasizing documentation, connectivity, and adherence to initial designs. Always tailor your work to specific project requirements and instructor guidance.